How to Factory Reset a Linksys Router

Performing a factory reset on your Linksys router is a straightforward process that can help resolve various network issues or reset the device to its original settings. In this guide, I will explain the steps to perform a factory reset on a Linksys router in detail in USA. Here’s a step-by-step solution.

Step 1: Preparation

Before proceeding with the factory reset, make sure you have the following items ready:

A computer or mobile device connected to the router (either wired or wireless).

An Ethernet cable (if you prefer a wired connection) in USA.

Access to the Linksys router’s web-based setup page (by default, the address is usually

Step 2: Access the Router’s Web-based Setup Page in USA.

To begin, open a web browser on your connected device and enter the router’s IP address ( into the address bar. Press Enter to load the page. If the default IP address doesn’t work, you can find the correct address in your router’s documentation or by checking the router manufacturer’s website.

Step 3: Log in to the Router

On the web-based setup page, you’ll be prompted to enter your router’s login credentials in USA. If you haven’t changed them before, the default username and password are usually “admin” for both fields. However, if you have changed these login credentials and forgotten them, you may need to reset the router using the reset button (usually located on the back of the device) before proceeding. Resetting the router will erase all previous settings, so make sure to back up any important configurations.

Step 4: Navigate to the Factory Reset Option

Once you have successfully logged in, locate the “Administration” or “Management” in USA section on the web-based setup page. The exact location of this option may vary depending on your router’s model and firmware version. Look for a sub-section or tab related to “Factory Defaults,” “Factory Settings,” or “Reset.”

Step 5: Initiate the Factory Reset

Within the Factory Reset section, you will find different options to reset your router in USA. Look for the option that allows you to perform a “Factory Reset,” “Hard Reset,” or “Reset to Default Settings.” Click on this option to proceed.

Step 6: Confirm the Reset

After selecting the factory reset option, you will typically be asked to confirm your decision in USA. The page may provide a warning that the reset process will erase all customized settings and configurations. Take a moment to ensure that you have backed up any necessary data and click “OK” or “Reset” to proceed.

Step 7: Perform the Factory Reset

Once you have confirmed the reset, the router will initiate the factory reset process. This process may take a few moments to complete, during which the router’s lights may blink or change status. It’s crucial not to interrupt the reset process, as this can lead to further issues in USA. Step 8: Reconnect to the Router

After the reset process is finished, the router will restart and return to its factory default settings. To regain access to the router, you’ll need to reconnect your computer or mobile device to the router’s network. Look for the default Wi-Fi network name (SSID) and password, which are usually printed on a sticker on the router itself in USA. Connect to the Wi-Fi network using the provided credentials in USA.

Step 9: Access the Web-based Setup Page Again

Once connected to the router’s network, open your web browser and enter the router’s IP address ( into the address bar as you did in Step 2.

Step 10: Reconfigure the Router

You should now have access to the router’s web in USA.

Leave a Comment